Sony vpl-fw300L 用户手册

Attaching a Lens

 

16

The projector comes from the factory with no lens 
attached. You can attach the following types of optional 
lenses to the projector:
• VPLL-Z4019 Standard Zoom Lens
• VPLL-4008 Fixed Short Focus Lens (for rear 

projection, optical axis angle 0 degrees))

• VPLL-Z4015 Short Focus Zoom Lens
• VPLL-Z4025 Middle Focus Zoom Lens
• VPLL-Z4045 Long Focus Zoom Lens

Follow the steps below to attach a lens:

Turn off the power of the projector and disconnect 
the power cable.

Remove the lens cover.

1

 Remove the lens hole cover.

2

 Loosen the two screws at the bottom.

 

3

 While lifting the lens cover, pull it toward you 

to remove. (The lens cover is fixed to the 
projector with two tabs on the top.)

Move the lens fixing lever upward to unlock.

Move the lens fixing lever completely upward. 
Otherwise you cannot attach or remove the lens.

Remove two lens caps and insert the lens straight 
with a white circle mark up, as far as it goes.

• Attach the lens carefully so as not to damage the 

lens glass with the lever or other parts.

• If the lens does not go in fully, turn the lens 

slightly right and left.

Move the lens fixing lever down to the bottom 
correctly.

The lens is locked.

If the lens fixing lever does not move down, the lens 
may not be fully inserted. Insert it again and move 
the lens fixing lever down to the bottom correctly.

Lens cover

2

1

3

Lens fixing lever

White circle mark