Sony vpl-fw300L 用户手册
Installation Diagram
19
Ceiling Installation (C and D on
page 63)
page 63)
This section gives examples for installing the projector
on the ceiling.
When installing the projector on the ceiling, use the
optional PSS-630 Projector Suspension Support.
For ceiling installation, consult with qualified Sony
personnel only.
on the ceiling.
When installing the projector on the ceiling, use the
optional PSS-630 Projector Suspension Support.
For ceiling installation, consult with qualified Sony
personnel only.
Note on the dust cover
When installing the projector on the ceiling, be sure to
attach the supplied dust cover to the projector.
Fix the dust cover to the ceiling bracket mounting holes
of the projector together with the projector mounting
bracket of the PSS-630.
The mounting screws are not supplied. Use the screws
supplied with the PSS-630 or commercially available
M6 screws with embedment length of 10 to 11 mm
(
attach the supplied dust cover to the projector.
Fix the dust cover to the ceiling bracket mounting holes
of the projector together with the projector mounting
bracket of the PSS-630.
The mounting screws are not supplied. Use the screws
supplied with the PSS-630 or commercially available
M6 screws with embedment length of 10 to 11 mm
(
13
/
32
to
7
/
16
inches).
The installation measurements are shown when you
install the projector with the VPLL-Z4019 Standard
Zoom Lens on the ceiling using the PSS-630 Projection
Suspension Support.
install the projector with the VPLL-Z4019 Standard
Zoom Lens on the ceiling using the PSS-630 Projection
Suspension Support.
For more details on the ceiling installation, refer to the
Installation manual for Dealers of the PSS-630.
Installation manual for Dealers of the PSS-630.
Adjusting the Projector Height
The distance between the ceiling and the mounting
surface of the Projector Suspension Support (value “c”
in Fig. F) is adjustable in the following range. The
optional PSS-630P Projector Suspension Support Joint
Pole is available for the height adjustment.
surface of the Projector Suspension Support (value “c”
in Fig. F) is adjustable in the following range. The
optional PSS-630P Projector Suspension Support Joint
Pole is available for the height adjustment.
Without using PSS-630P poles: 350/380/410/440/470/
500 mm (13
7
/
8
/ 15 / 16
1
/
4
/ 17
3
/
8
/ 18
5
/
8
/19
3
/
4
inches)
Using one PSS-630P pole: 630/660/690/720/750/780
mm (24
7
/
8
/ 26 / 27
1
/
4
/ 28
3
/
8
/ 29
5
/
8
/ 30
3
/
4
inches)
Using two PSS-630P poles: 910/940/970/1,000/1,030/
1,060 mm (35
7
/
8
/ 37
1
/
8
/ 38
1
/
4
/ 39
3
/
8
/ 40
5
/
8
/
41
3
/
4
inches)
Using three PSS-630P poles: 1,190/1,220/1,250/1,280/
1,310/1,340 mm (47 / 48
1
/
8
/ 49
1
/
4
/ 50
1
/
2
/ 51
5
/
8
/
52
7
/
8
inches)
Floor Installation for Twin Stacking
(H on page 68)
(H on page 68)
This section gives examples for installing two projectors
on the desk using twin-stacking.
80 to 600-inch screens are available for twin stack
installation.
on the desk using twin-stacking.
80 to 600-inch screens are available for twin stack
installation.
Note
For safety and maintenance purposes, install the
projectors away from the wall. Leave a minimum space
of 50 cm (19
projectors away from the wall. Leave a minimum space
of 50 cm (19
3
/
4
inches) from both sides and the rear.
Note on stacking
1
Install the projector following the “a” value in
stacking example H.
stacking example H.
2
Use the zoom to align the pictures from the first and
second projectors so that they fill the screen.
second projectors so that they fill the screen.
This section gives the projector outside dimensions with
the VPLL-Z4019 Standard Zoom Lens.
the VPLL-Z4019 Standard Zoom Lens.
Front
I
Top
J
Side
K
Bottom L
Rear
M
Ceiling bracket dimensions N
Dust cover (supplied)