Rosewill G03-ATI9000 用户手册

 
 
 
                                                                                                                                                                                                                                                                                                                                                 

 
 
 

 

the motherboard. For more information, see your computer documentation. 
4. 

Locate the AGP slot. If necessary, remove the metal cover from this slot; then 
align your RADEON™ with the AGP slot, and press it in firmly until the card 
is fully seated. 

Replace the screw to fasten the card in place, and replace the computer cover. 

Plug the display cable into your card; then turn on the computer and monitor. If 
your RADEON™ came with a DVI connector, you can connect a flat panel 
display to the appropriate connector, as shown below. 

 

 

 

You are now ready to proceed with the installation of the ATI driver. For detailed 
instructions, select your operating system from the list on page 7 to 9. 

Grasp the 

RADEON™ by the 

top edge and 

carefully seat it into 

the AGP slot. 

Ensure that the 

metal contacts are

pushed into the 

slot. 

 

Make sure all 

cables are securely 

connected.