Hitachi CP-A300N 用户手册

6

Be sure to read the manuals for devices before connecting them to the projector. 

Make sure that all the devices are suitable to be connected with this product, and 

prepare the cables required to connect. Please refer to the following illustrations 

to connect them. 

For details, please see “User's Manual” - “Operating Guide” and “Network Guide”. 

(20, 22)

• When AUTO is selected for the 

COMPUTER IN1 or COMPUTER IN2 port in 

COMPUTER IN of the INPUT menu, that port will accept component video signals.

• To use network functions of the projector, connect the 

LAN port with the 

computer's LAN port, or with an access point that is connected to the computer 

with wireless LAN, using a LAN cable.

(continued on next page)

• If you insert a USB storage device, such as a USB memory, into the 

USB TYPE A 

port and select the port as the input source, you can view images stored in the device.

• You can connect a dynamic microphone to the 

MIC port with a 3.5 mm mini-plug. 

In that case, the built-in speaker outputs the sound from the microphone, even 

while the sound from the projector is output.

• The projector may make a rattling sound when tilted, moved or shaken, 

since a fl ap to control the air fl ow inside of the projector has moved. Be aware that 

this is not a failure or malfunction.