Toshiba BSA4TMGS12QMR 用户手册
1. UNPACKING
EO18-33016A
1.2 Checks
1- 2
1.2 Checks
1. Check for damage or scratches on the printer.
2. Confirm that none of the accessories are missing. The parts below are provided as accessories.
2. Confirm that none of the accessories are missing. The parts below are provided as accessories.
(B-SA4TM only)
NOTE:
Keep the carton and pads for later transport.
2. PRINTER
INSTALLATION
1. Place the printer on the level surface.
2. Keep enough space for replacing and maintenance works while the top cover is opened.
2. Keep enough space for replacing and maintenance works while the top cover is opened.
Warranty Disclaimer Sheet
Supply Loading Instructions
(Doc. No. EO2-33015 for B-SA4TM)
(Doc. No. EO2-33017 for B-SA4TP)
(Doc. No. EO2-33015 for B-SA4TM)
(Doc. No. EO2-33017 for B-SA4TP)
CD-ROM
Safety Precautions
(Doc. No.: EO2-33016)
(Doc. No.: EO2-33016)
Quality Control Report
Printer Rear Support
SMW-4x8 Screw
Cable Clamp
SMW-3x8 Screw
30 mm
300 mm
30 mm
300 mm
700 mm
300 mm
75 mm
CAUTION!
When installing the printer, take the following
precautions. Failure to do this may cause fire,
electric shock, or injury.
1. Avoid locations where it is subject to the
precautions. Failure to do this may cause fire,
electric shock, or injury.
1. Avoid locations where it is subject to the
following:
• Direct sunlight
• High temperature, high humidity
• Rapid change in temperature
• Excessive vibration
• Dust
2. Keep away from any devices that emit
magnetism or electromagnetic wave.
3. Keep away from flame or moisture.
4. Be sure to place the printer on a level and
4. Be sure to place the printer on a level and
stable surface.
5. As the enclosure of the B-SA4TP model is
made from plastic, do not install the printer
where it might be exposed to oil or solvent.
where it might be exposed to oil or solvent.