Panasonic KX-FLB881 用户手册
2. Preparation
19
For assistance, please visit http://www.panasonic.com/help
Volume
2.6 Adjusting volume
Important:
L
Before adjusting volume, set the operation mode
to fax mode. If the {FAX} light is OFF, turn it ON
by pressing {FAX}.
to fax mode. If the {FAX} light is OFF, turn it ON
by pressing {FAX}.
Ringer volume
While the unit is idle, press {V} or {^}.
While the unit is idle, press {V} or {^}.
L
If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {V} repeatedly to display “
Press {V} repeatedly to display “
RINGER OFF= OK?”.
i {SET}
L
The unit will not ring.
L
To turn the ringer back ON, press {^}.
Ringer pattern
L
You can select one of 3 ringer patterns (feature #161
on page 52).
on page 52).
Monitor volume
While using the monitor, press {V} or {^}.
While using the monitor, press {V} or {^}.
Initial Programming
2.7 Date and time
1
{
MENU} i {#}{1}{0}{1} i {SET}
M:
|
01/D:01/Y:07
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.
M:
|
08/D:10/Y:07
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
Note:
L
The other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
time on the top of each page you send according to
your unit’s date and time setting.
L
After setting the date and time, if the unit is in the
copy mode, change it to the fax mode by pressing
{
copy mode, change it to the fax mode by pressing
{
FAX}. You can check your unit’s date and time
setting on the display.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
The date and time will be automatically set according to
the received caller information.
L
If the time has not previously been set, Caller ID will
not adjust the clock.
not adjust the clock.
L
You can turn this feature OFF (feature #226 on page
52).
52).
{
SET} {V}{^}
{
FAX}
{
SET}
{
FAX}
{<}{>}
{
MENU}
FLB881-PFQX2732ZA-OI-en.book Page 19 Wednesday, July 18, 2007 11:22 PM