FARGO electronic Pro-L 用户手册
76 Section 9: Troubleshooting
Pro-L Card Printer Users Manual
BOTH Lines of LCD (continued)
Message
Cause
Solution
EE Memory Error!
Indicates problem with
Remove the ribbon and press
RESUME=Clear Mem
permanent circuit board
the Pause/Resume button to
memory.
recalibrate the printers memory
module. Turn the printer power
OFF and ON to reset.
EE Memory Error!
Permanent circuit board
Call for technical assistance.
RESUME=Retest
memory is bad.
Insert New Key
Appears when you are
Remove the valid access card
RESUME=Duplicate
trying to duplicate a
being duplicated and insert a
SmartGuard Access Card.
blank access card. Then,
Appears only if you are
press the printers Pause/
using the SmartGuard
Resume button to complete the
Security Feature.
duplication process. If you
decide not to duplicate the card,
press theprinters On/Cancel
button.
Invalid Shield
Appears if the SmartShield
Re-encode the SmartGuard
Send New Shield
data on your SmartGuard
password and the SmartShield
Access Card has somehow
data onto the card.
become corrupt. Appears
only if you are using the
SmartGuard Security
Feature.
Preparing Card
Appears when you initiate
To initiate a card count
Count=xxxxxxxx
a card count report from the report, press and hold the
printer.
Pause/Resume button for about
5 seconds. A card count will
appear on the LCD Display and
a card with the same count report
will be printed. If you do not
want the card count report to
print, press the Pause/Resume
button and then the On/Cancel
button.
Press ON to
Appears when the On/
Press the On/Cancel button
Initialize
Cancel button is pressed
to restart the printer and return
before a print job is sent,
it to its Ready mode.
when the printer is in its
Ready mode.
proL.qxd 8/6/2000 3:30 PM Page 76