Rimage 110705-000 用户手册

下载
页码 30
Run Masker 
The Rimage Raster Masker displays allowing you to adjust the mask (non-printable area) 
settings for the selected media type (
Standard CD/DVD 120 mm
 only).  This works well when 
you do not want the edges printed. If you print on the edges of a disc where there is not 
printable surface, the ink will smear or run. 
 
Standard Area Settings
 let you adjust the standard outer and inner diameter settings, etc. 
Hub Settings
 let you select the 
Print On Hub
 feature and adjust the related outer and inner 
diameter settings. 
Parameter Unit
 lets you switch between a unit of measure of times 1.0 mm or times 0.1 mm. 
Maintenance 
The maintenance section allows you to select alignment functions, diagnostics, or update the flash. 
 
Center Image  –
 
The Center Image function is only required if the printed image is not 
centered on the label. Directions are found on the next page. 
Align Cartridges – directions are found on page 
Diagnostics – directions are found on page 
Update Loader Flash – Do not use. This function is not supported on standalone Liberty 
Printers. 
Clean Cartridges – Cleans the ink jet nozzles when the jets are dried out. Refer to page 
 23