Kodak 8670 PS 用户手册
Operator’s Guide
Machine Generated Error Codes
The following are machine generated error codes:
Error Codes
Error Code
Description
Possible Solution
500
There is no receiver at the lead
edge sensor when expected
edge sensor when expected
1. Verify that the correct media
and ribbon are loaded.
2. Clean the sensor.
3. If the error persists, call for
service.
501
The receiver is stuck at the lead
edge sensor
edge sensor
502
The receiver size has changed
without removing the tray
without removing the tray
503
Invalid tray size input
510
The bar code label is not correct
The bar code sensor or FRU is
malfunctioning
malfunctioning
511
The bar code label is not correct, or
it has been damaged
it has been damaged
The bar code sensor or FRU is
malfunctioning
malfunctioning