Toshiba 960-498 用户手册
4.18 Speaker/VGA fan
4 Replacement Procedures
Installing the Speaker/VGA fan
The following describes the procedure for installing the speaker and VGA fan (See Figure 4-
33).
33).
NOTE: When installing speakers, make sure they are fit to the guides closely by pressing
them from the top.
Pass the VGA fan cable first on the base assembly so that the speaker (L) cable
passes on the cable.
passes on the cable.
1. Install the VGA fan according to screw holes on the base assembly and secure it with
the following screws.
•
M2
×4B BIND
screw x2
2. Install the VGA EARTH SPRINGs on the VGA fan and secure them with the
following screws.
•
M2
×3C SUPER THIN HEAD screw
x2
3. Install the speaker R along the guide of the base assembly.
4. Install the speaker L along the guide of the base assembly.
5. Arrange the speaker cable L along the ribs and fix it with the insulator and glass
tapes.
4-50
QOSMIO F10 Maintenance Manual (960-498)