Furman Sound PM-PRO E II 用户指南

IMPLIED, INCLUDING BUT NOT LIMITED 

TO THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE.  Manufacturer 

does not warrant against damages or defects 

arising out of improper or abnormal use of 

handling of the Product; against defects or 

damages arising from improper installation, 

against defects in products or components 

not manufactured by Manufacturer, or 

against damages resulting from such non-

Manufacturer made products or components. 

This warranty shall be cancelable by 

Manufacturer at its sole discretion if the 

product is modified in any way without written 

authorization from Furman Sound. This 

warranty also does not apply to Products upon 

which repairs have been affected or attempted 

by persons other than pursuant to written 

authorization by Manufacturer.

THIS WARRANTY IS EXCLUSIVE. The sole 

and exclusive obligation of Manufacturer shall 

be to repair or replace the defective Product 

in the manner and for the period provided 

above. Manufacturer shall not have any other 

obligation with respect to the Products or 

any part thereof, whether based on contract, 

tort, strict liability or otherwise. Under no 

circumstances, whether based on this Limited 

Warranty or otherwise, shall Manufacturer be 

liable for incidental, special, or consequential 

damages. Manufacturer’s employees or 

representatives’ ORAL OR OTHER WRITTEN 

STATEMENTS DO NOT CONSTITUTE 

WARRANTIES, shall not be relied upon by 

Purchaser, and are not a part of the contract 

for sale or this limited warranty. This Limited 

Warranty states the entire obligation of 

Manufacturer with respect to the Product. If 

any part of this Limited Warranty is determined 

to be void or illegal, the remainder shall remain 

in full force and effect.

S E R V I C E

Before returning any equipment for repair, 

please be sure that it is adequately packed 

and cushioned against damage in shipment, 

and that it is insured. We suggest that you 

save the original packaging and use it to ship 

the product for servicing. Also, please enclose 

a note giving your name, address, phone 

number and a description of the problem.

NOTE: All equipment being returned for 

repair must have a Return Authorization (RA) 

Number. To get an RA Number, please call the 

Furman Service Department: (707) 763-1010, 

ext. 121. Please display your RA Number 

prominently on the front of all packages.

5

I N T R O D U C T I O N

Thank you for purchasing a Furman Merit 

Series Power Distributor or Conditioner, and 

congratulations on your choice. 

 The Merit 

Series power conditioners feature excellent 

surge protection as well as RFI / EMI filtration. 

S A F E T Y   I N F O R M AT I O N

To obtain best results from your Furman Merit 

Series unit, please read this manual carefully 

before using.

WA R N I N G

To reduce the risk of electrical shock, do not 

expose this equipment to rain or moisture.  

Dangerous high voltages are present inside 

the enclosure. Do not remove the covers.  

Refer servicing to qualified personnel only.  

The lightning flash with an arrowhead symbol 

is intended to alert the user to the presence 

of un-insulated dangerous voltage within the 

product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock.

I M P O R TA N T   S A F E T Y                 

I N S T R U C T I O N S

(Please read prior to installation)

1. Please read and observe all safety and 

operating instructions before installing your 

Merit Series unit.  Retain these instructions for 

future reference.

2. Your Merit Series unit should not be used 

near water – for example, near a bathtub, 

washbowl, kitchen sink, laundry tub, in a wet 

basement, near a swimming pool, etc.

3. Do not place your Merit Series unit near 

heat sources such as radiators, heat registers, 

stoves, or other appliances that produce heat.

4. The Merit Series units should only be 

connected to a 120 VAC, 60Hz, 15 amp 

grounded electrical outlet.  Do not defeat the 

ground or change polarization of the power 

plug. 

5. Route the power cord and other cables so 

that they are not likely to be walked on, tripped 

over, or stressed. Pay particular attention to 

the condition of the cords and cables at the 

plugs, and the point where they exit your Merit 

Series unit. To prevent risk of fire or injury, 

damaged cords and cables should be replaced 

immediately.

6. Clean your Merit Series unit with a damp 

cloth only. Do not use solvents or abrasive 

cleaners. Never pour liquid on or into the unit.

7. Your Merit Series unit should be serviced by 

qualified service personnel when:

• The power supply cord or the plug has been 

frayed, kinked, or cut.

• Objects have fallen or liquid has spilled into 

the unit.

• The unit has been exposed to rain or other 

moisture.

• The unit does not appear to operate normally.

• The unit has been dropped, or the enclosure 

has been damaged.

• The retractable lights have failed.  

8. Your Merit Series unit requires that a safety 

ground be present for proper operation. Any 

attempt to operate the unit without a safety 

ground is considered improper operation and 

could invalidate the warranty.  

9. Do not attempt to service your Merit Series 

unit beyond what is described in this manual. 

All other servicing should be referred to 

qualified service personnel.

2