Marantz PM-14S1 用户手册

Preparation

Playback

Settings

Tips

Appendix

ENGLISH

Connections

Stereo complete bi-amp connection

This mode enables the two amplifiers connected to this unit

to function as one monaural amplifier. To use this mode, two

F.C.B.S. connected PM-14S1 units are required.

To switch the mode, use the amplifier mode switch on the

rear panel while the power is off.

The figures below show example displays in the stereo and

bi-amp modes.

Bi-amp mode

Bi-amp mode indicator

Stereo mode

In bi-amp mode, connect to the left channel input jack. The

right channel input is disabled.

The same signals are output from the left and right output

jacks.

NOTE

• Always turn the power to the unit off before changing the

operating mode switch setting. Turning the power on again

activates the new setting.

• When in bi-amp mode, the R channel input jacks cannot be

used.

• When in bi-amp mode, the signals input into the L channel

are output from both channels. Therefore, the same signals

are output from the L channel and R channel in RECORDER

OUT, PRE OUT, PHONES OUT.

• Speaker systems connected using complete bi-amp

connections must support bi-amp connections. Before

connecting your speakers, check in the owner’s manual

that came with the speakers or contact the manufacturer to

confirm whether they support bi-amp connection.

Set PM-14S1

for L channel

to ID 1.

MF / HF

• Set SPEAKER button on front panel

in on position.

• Set to “BI-AMP”.

To power outlet.

Remove

shorting bar.

L channel

speaker

Remove

shorting bar.

Remove

shorting bar.

R channel

speaker

Remove

shorting bar.

Set PM-14S1

for R channel

to ID 2.

Set SPEAKER button on front panel in

on position.
• Set to “BI-AMP”.

Super Audio CD player, etc.

: Signal flow

F.C.B.S. connection

1.PM14S1U_ENG_0722.indd 11

2013/07/25 17:08:28