3M 800r3 用户手册
8
Specifications
(Continued)
9.
Box Weight and Size Capacities:
Weight
Maximum – up to 38.6 kg [85 pounds]
Minimum – contents must support top flaps and
weight must be sufficient to hold bottom flaps
fully closed.
Minimum – contents must support top flaps and
weight must be sufficient to hold bottom flaps
fully closed.
Box Size
OUTER COLUMNS IN STANDARD POSITION
MINIMUM
Length
–
205 mm [8.00 in]
Width
–
133 mm [5.25 in]
Height
–
127 mm [5.00 in]
MAXIMUM
Length
–
Not Limited
Width
–
508 mm [20.0 in]
Height
–
533 mm [21.0 in]
OUTER COLUMNS IN OPTIONAL RAISED
POSITION
POSITION
MINIMUM
Length
–
205 mm [8.00 in]
Width
–
130 mm [5.25 in]
Height
–
232 mm [9.12 in]
MAXIMUM
Length
–
Not Limited
Width
–
508 mm [20.00 in]
Height
–
644 mm [25.38 in]
(Specifications continued on next page.)
Special modifications may be available for
carton sizes not listed above. Contact your 3M
Representative for information.
carton sizes not listed above. Contact your 3M
Representative for information.
Note:
The case sealer can accommodate most
boxes within the size range listed above. However,
if the box length (in direction of seal) to box height
ratio is .5 or less, then several boxes should be test
run to assure the proper machine performance.
if the box length (in direction of seal) to box height
ratio is .5 or less, then several boxes should be test
run to assure the proper machine performance.
DETERMINE THE BOX LIMITATIONS BY
COMPLETING THIS FORMULA:
COMPLETING THIS FORMULA:
Box Length In
Direction Of Seal
Direction Of Seal
Must Be Greater Than .5
Box Height
Any box ratio approaching this limitation should be
test run to assure performance.
test run to assure performance.