3M 800rf 用户手册
38
11 - SET UP AND ADJUSTMENTS
(continued)
2012 March
800rf-NA
11.17 Use and Adjustments of the Photocells
Photocell 1
The photocell does not operate at the fi rst machine starting ; when it is obscured by the next box the motorized
plane of the infeed conveyor stops. No adjustment is necessary.
The photocell does not operate at the fi rst machine starting ; when it is obscured by the next box the motorized
plane of the infeed conveyor stops. No adjustment is necessary.
Photocell 2
When is obscured by the box the motorized plane goes down and the side guides center the box. No adjustment
is necessary.
is necessary.
Photocell 3
It controls the closure of the side drives and and the descent of the rear fl ap folder. The position can be changed
according to box lengthy; move the photocell towards D for long boxes, towards S for short boxes.
according to box lengthy; move the photocell towards D for long boxes, towards S for short boxes.
Photocell 4
It stops the side drives and control the upper unit descent. No adjustment is necessary.
Photocell 5
When the box is passed it controls the machine reset for a new working cycle. No adjustment is necessary.
Photocell 6
When is obscured stops the machine and activates the ‘full line’ warning light on the control board. It's a tempo-
rary stop; he machine restarts just when the box is removed an so the photocell is rearmed. No adjustment is
necessary.
rary stop; he machine restarts just when the box is removed an so the photocell is rearmed. No adjustment is
necessary.
6
5
4
3
2 1
S
D
Figure 11-36