Cabletron Systems 2E48-27R 用户手册

The following explains each field of the Broadcast Suppression screen:

PORT # (Read-only)

Identifies the number of the port.

Total RX (Read-Only)

Displays the total number of broadcast frames received.

Peak Rate (Read-Only)

Displays the highest number of broadcast frames received in a one second 
interval.

Time Since Peak (Read-Only)

Displays the time since peak rate was achieved.

Threshold (Modifiable)

Allows the user to set the desired limit of receive broadcast frames that 
will be forwarded per port per second.

Reset Peak (Toggle)

Allows the user to reset the Peak Rate. Resetting the Peak Rate also resets 
the Time Since Peak field. The Reset Peak field toggles between YES and 
NO. For details, refer to 

[1-12] or [13-24]

(Navigation Key)

When the Broadcast Suppression screen displays, the current statistics are 
displayed for the first 12 ports. This field allows the user to step to a 
second screen for the same type of information for ports 13 through 24. 
While on the second screen, the user can navigate back to the first screen 
by highlighting the [1-12] field and pressing ENTER. The user can 
change the Threshold or Reset Peak fields while in either the first or 
second screen. For details, refer to 

To set the Threshold, proceed as follows:

Use the arrow keys to highlight the Threshold field for the selected 
port.

Type in the numbers for the desired limit. Only enter values in 
increments of ten (for example; 10, 20, 30, etc.).