Cabletron Systems 2E48-27R 用户手册
Chapter 5: Local Management
5-74
2E48-27R/2E49-27R User’s Guide
5.21.2
Using the Clear Counters Command
To reset all the statistics counters of the selected interface to zero, perform
the following steps:
the following steps:
1.
Use the arrow keys to highlight the CLEAR COUNTERS command.
2.
Press ENTER, the counters for the selected interface are reset to zero.
5.22
RMON STATISTICS SCREEN
RMON statistics for each interface, on an interface-by-interface basis, are
viewed through the RMON Statistics screen shown in
viewed through the RMON Statistics screen shown in
To access the RMON Statistics screen, use the arrow keys to highlight the
RMON STATISTICS field on the Device Statistics Menu screen and
press ENTER. The RMON Statistics screen displays.
RMON STATISTICS field on the Device Statistics Menu screen and
press ENTER. The RMON Statistics screen displays.
Figure 5-30
RMON Statistics Screen
NOTE
The RMON Statistics screen provides statistics for all front
panel Ethernet Interfaces, and any Fast Ethernet Interface
Modules installed in the 2E4X-27R. This screen does not
provide statistics for an installed HSIM.
panel Ethernet Interfaces, and any Fast Ethernet Interface
Modules installed in the 2E4X-27R. This screen does not
provide statistics for an installed HSIM.
Firmware Revision: XX.XX.XX
RMON Statistics
23142_65
BOOTPROM Revision: XX.XX.XX
RETURN
Device Type: 2E48-27R
RMON Index: X
Data Source: IfIndex.1
Drop Events:
Collisions:
Broadcast Pkts:
Multicasts:
CRC Align Errors:
Undersized Pkts:
Oversized Pkts:
Fragments:
Jabbers:
0
0
0
0
0
0
0
0
0
2E48-27R LOCAL MANAGEMENT
Event Message Line
Index: [
nn]
CLEAR COUNTERS
EXIT
Owner: monitor
Status: valid
Total Packets:
Total Octets:
64 Octets:
65 - 127 Octets:
128 - 255 Octets:
256 - 511 Octets:
512 - 1023 Octets:
1024 - 1518 Octets:
0
0
0
0
0
0
0
0