Cabletron Systems 2E48-27R 用户手册
Chapter 5: Local Management
5-8
2E48-27R/2E49-27R User’s Guide
5.4
ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Local
Management Password screen shown in
Management Password screen shown in
. Whenever a
connection is made to the 2E4X-27R the Local Management Password
screen displays. Before continuing, the user must enter a password
(community name) which is compared to the previously stored
passwords. The level of access allowed the user depends on the password.
To set or change passwords, refer to
screen displays. Before continuing, the user must enter a password
(community name) which is compared to the previously stored
passwords. The level of access allowed the user depends on the password.
To set or change passwords, refer to
. The following steps
describe the procedure to access Local Management.
1.
Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port of the 2E4X-27R auto-senses the baud rate of
the terminal) until the 2E4X-27R Local Management Password screen
displays.
because the COM port of the 2E4X-27R auto-senses the baud rate of
the terminal) until the 2E4X-27R Local Management Password screen
displays.
Figure 5-3
The 2E4X-27R Local Management Password Screen
2.
Enter the Password and press ENTER. The default super-user access
password is “public” or press ENTER.
password is “public” or press ENTER.
2E48-27R LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1997
Device Serial Number:
XXXXXXXXX
Device Hardware Revision:
XX
Device Firmware Revision:
X.XX.XX
Device BOOTPROM Revision:
X.XX.XX
Enter Password:
23141-12
Event Message Line