Cabletron Systems 2E48-27R 用户手册

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the date entered is a valid format, the message displays “SAVED OK” 
at the top of the screen. If the entry is not valid, Local Management does 
not alter the current value, but it does refresh the Device Date field with 
the previous value.

To set the device time, perform the following steps:

Use the arrow keys to highlight the Device Time field.

Enter the time in this 24-hour format: HH:MM:SS

Press ENTER to set the system clock to the time in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the time entered is a valid format, the message displays “SAVED OK” 
at the top of the screen. If the entry is not valid, Local Management does 
not alter the current value and refreshes the Device Time field with the 
previous value.

The screen refresh time is set from 3 to 99 seconds with a default of 3 
seconds. To set a new screen refresh time, perform the following steps:

Use the arrow keys to highlight the Screen Refresh Time field.

Enter a number from 3 to 99.

Press ENTER to set the refresh time to the time entered in the input 
field.

When entering the time in the system time field, separators 
between hours, minutes, and seconds are not needed as long 
as each entry uses two numeric characters. For example, to set 
the time to 6:45

 

P

.

M

., type “184500” in the Device Time field.