Cabletron Systems 2E48-27R 用户手册

The password used to access Local Management at the Password Screen 
must have super-user access to view and edit the SNMP Community 
Names screen. Using a password with read-only or read-write access does 
not allow the user to view or edit the SNMP Community Names screen.

To establish community names, proceed as follows:

Use the arrow keys to highlight the Community Name field adjacent 
to the selected access level.

Enter the password in the field (maximum 31 characters).

Press ENTER.

Repeat steps 1 through 3 to modify the other community names.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER. The message “SAVED OK” displays. 
The community names are saved to memory and their access modes 
implemented.

Any community name assigned in the SNMP Community 
Names screen is a password to its corresponding level of 
access to Local/Remote Management. The community name 
assigned Super-User access is the only one that gives the user 
complete access to Local/Remote Management.

Exiting without saving causes a “NOT SAVED?” message to 
display above the SAVE command. Edits are lost if they are not 
saved before exiting.