Cabletron Systems 2E48-27R 用户手册

Chapter 5: Local Management

The following briefly explains each screen accessible from the High 
Speed Interface Configuration Menu screen. 

Displays a screen named High Speed Interface Configuration. This screen 
shows the types of Fast Ethernet Interface Modules installed in ports 25 
and 26, their current operating mode, and indicates if the ports are linked. 
This screen also allows the user to enable or disable Auto-Negotiation and 
set the Advertised Ability. For details, refer to 

Displays the types of interfaces installed in the High Speed Interface 
Module (HSIM) slots. The HSIM screens are described in their respective 
user’s guides.

The High Speed Interface Configuration screen displays the types of 
interfaces installed in ports 25 and 26, their current operating mode, and 
indicates if the ports are linked. This screen also allows the user to enable 
or disable Auto-Negotiation and set the Advertised Ability.

To access the High Speed Interface Configuration screen from the High 
Speed Interface Configuration Menu screen, use the arrow keys to 
highlight the FAST ETHERNET INTERFACES menu item and press 
ENTER. The High Speed Interface Configuration

 screen displays.

The High Speed Interface Configuration screen, 

applies only to ports 25 and 26. This screen supports the 
FE-100TX, FE-100FX, and FE-100F3 Fast Ethernet Interface 
Modules that operate at 100 Mbps.