Cisco Systems 3130 用户手册
15-6
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 15 Configuring Private VLANs
Configuring Private VLANs
•
If two stacks merge, private VLANs on the winning stack are not affected, but private-VLAN
configuration on the losing switch is lost when that switch reboots.
configuration on the losing switch is lost when that switch reboots.
For more information about switch stacks, see
Configuring Private VLANs
These sections contain this configuration information:
•
•
•
•
•
•
•
Tasks for Configuring Private VLANs
To configure a private VLAN, perform these steps:
Step 1
Set VTP mode to transparent.
Step 2
Create the primary and secondary VLANs and associate them. See the
.
Note
If the VLAN is not created already, the private-VLAN configuration process creates it.
Step 3
Configure interfaces to be isolated or community host ports, and assign VLAN membership to the host
port. See the
port. See the
.
Step 4
Configure interfaces as promiscuous ports, and map the promiscuous ports to the primary-secondary
VLAN pair. See the
VLAN pair. See the
Step 5
If inter-VLAN routing will be used, configure the primary SVI, and map secondary VLANs to the
primary. See the
primary. See the
Step 6
Verify private-VLAN configuration.
Default Private-VLAN Configuration
No private VLANs are configured.