Raritan Computer DKX2-v2.6.0-0R-E 用户手册
Chapter 8: Device Management
161
See
Certified Modems
(on page 307) for information on certified
modems that work with the KX II.
For information on settings that will give you the best performance when
connecting to the KX II via modem, see Creating, Modifying and
Deleting Profiles in MPC - Generation 2 Devices in the KVM and
Serial Access Clients Guide.
connecting to the KX II via modem, see Creating, Modifying and
Deleting Profiles in MPC - Generation 2 Devices in the KVM and
Serial Access Clients Guide.
Note: Modem access directly to the KX II HTML interface is not
supported. You must use standalone MPC to access the KX II via
modem.
supported. You must use standalone MPC to access the KX II via
modem.
Note: To use a modem with the KX II, users must be members of the
Admin group.
Admin group.
Configuring Date/Time Settings
Use the Date/Time Settings page to specify the date and time for the KX
II. There are two ways to do this:
II. There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time Protocol (NTP)
server.
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:
User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).
time. For the time, use the hh:mm format (using a 24-hour clock).
Synchronize with NTP Server - use this option to synchronize the
date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional
Note: If DHCP is selected for the Network Settings on the Network
page, the NTP server IP address is automatically retrieved from the
DHCP server by default. Manually enter the NTP server IP address
by selecting the Override DHCP checkbox.
page, the NTP server IP address is automatically retrieved from the
DHCP server by default. Manually enter the NTP server IP address
by selecting the Override DHCP checkbox.
6. Click OK.