Adder Technology Switch 用户手册

This section covers the various ways that you can select a computer when using 
the remote IP connection. 

1  Click the ‘Show Remote Console’ option. If the login menu is displayed, log-

in first. Otherwise, the Remote Console window will be displayed:

This is where you select computer ports and view the resulting screen 
images.
Note: If the security option has been set within the KVM section, you will 
need to enter an additional Login and Password – see 

2  Select the required computer port in one of three main ways: 

•  Click the required computer button from the selection at the top of the 

Remote Control window. This is the preferable method because any 
screen setup parameters that are set for a particular computer will be 
invoked every time the same computer is re-selected in this manner. This 
method of selection uses the switching codes that are configured within 
the 

 panel discussed on the previous page.

•  Use a KVM hotkey sequence, such as 

 

   (selects port 6). For 

cascaded computers with lengthy addresses, one of the other two 
methods is recommended. 

•  Display the KVM menu (

 

  ) and select a computer by name 

from the list.  

Whichever method is used, when a channel is selected, the resulting video 
image will be shown within the Remote Console window.

When the SmartView World first accesses a computer via IP connection it is likely 
that the screen arrangement and mouse responses, from the remote machine, 
are not as optimal as they can be. If this is the case then you need to carry out 
two steps for each computer. These steps need only be carried out once for 
each port as the SmartView World will store the optimal settings. The mouse 
has two modes that are selectable from the Options menu within the Remote 
Console window, under the ‘Mouse Handling’ option: Fast Sync and Intelligent 
Sync. The former creates a quick synchronisation between the ‘local’ movement 
of your mouse and the response of the remote mouse pointer of the computer. 
The Intelligent Sync option takes a little more time than the fast mode, and 
requires a fully optimised screen, but it gives a better correlation between your 
movements and the response of the remote computer.  

1  Within the SmartView World home page, select the ‘Show Remote Console’ 

option in the ‘Server’ section. The Remote Console window will be displayed 
- see opposite.

2  Carry out the following two steps as necessary:

•  To adjust the video display: Click the 

 button. The SmartView World 

will determine the optimum display settings – while this process takes 
place the Remote Console window will go blank for a few moments.

•  To synchronise the mouse: Click the 

 button. The SmartView 

World will match the response of the mouse pointer on the remote 
computer to the movement of your mouse. 
Note: To optionally change between the two mouse synchronisation 
modes (‘Fast Sync’ and ‘Intelligent Sync’) click the ‘Options’ button 
(within the Remote Console window), select the ‘Mouse Handling’ 
option and select the required mode from the resulting flyout.