Adder Technology Switch 用户手册

The Functions menu contains a collection of procedures that affect various 
aspects of SmartView World operation. Only the Admin user will have access to 
all functions, other users are offered only the following options:

•  Restore Standard Mouse, 
•  Restore Intellimouse,
•  Power control - only computers to which a user has access rights can be 

switched.  

1  Select the on-screen menu in one of three ways: 

•  By simultaneously pressing and then releasing 

 

  . 

•  By pressing the middle and right buttons of a three button mouse, or
•  By selecting port   using the front panel buttons 

   If you are not already 

, do so now.

2  Press   to select ‘More menus’.
3  Use   to highlight ‘Functions’ and press 

.

4  Use the following keys: 

 and   to highlight required options.

 to change option values. 

 to quit and save the changes.

Power Control
The options within this section are usable only when the SmartView World is 
used in conjunction with one or more external power switch units. For more 
details see: power switching 

, 

.

Switch Computer ON
Select this option to power on one or more computers.

Switch Computer OFF
Select this option to power off one or more computers.

Edit Power ON String
Select this option to alter the special codes that are sent from the SmartView 
World to the connected power switch(es) in order to switch computers on.

Edit Power OFF String
Select this option to alter the special codes that are sent from the SmartView 
World to the connected power switch(es) in order to switch computers off.

Serial Port Setup
Select this option to configure the basic serial settings of the port used to attach 
the power switching units to the SmartView World.

Clear UTP Extender Password
Use this option to reset the password set within an extender unit. If you are 
connected to user ports 1 or 2, then the extender on port 1 will be cleared. If you 
are connected to user ports 3 or 4, then the extender on port 3 will be cleared.   

Reset to Factory Defaults
Returns all key settings within the SmartView World to their original states. 
WARNING: This function will clear all computer and user lists that are stored 
within the SmartView World.
When this option is selected, you must press   to confirm the action. The internal 
data will be rewritten and a completion message displayed after a short period.

Send Data to RS232 port
This option is used to save SmartView World configuration information to a 
specially connected computer. A temporary link must be made to one of the 
serial ports at the rear of the SmartView World and the computer must run a 
custom routine available from 

. The resulting download file can 

be optionally edited (using Microsoft Excel) and/or reloaded into the SmartView 
World. This option is especially useful in complex cascade arrangements where 
many computers are attached. See 

 for more details.     

Read Data from RS232 port
This option is used to reload configuration information into the SmartView 
World from a specially connected computer. See above for more details.

Restore Standard Mouse
This option is used to resume standard mouse operation if it has ceased to 
operate, for instance, if it has been connected without rebooting the SmartView 
World. See 

 for more details.

Restore Intellimouse
This option is used to resume Microsoft Intellimouse operation if it has ceased to 
operate, for instance, if it has been connected without rebooting the SmartView 
World. See 

 for more details.