Fujitsu RX330 用户手册
RX330 S1
Operating manual
43
Hardware installation
Installing/removing the server in/from the rack
Racks with installation depth smaller/greater than 735 mm
The lengths of the telescopic rails have to be adjusted with respect to each other
when installing in rack systems with an installation depth greater than/less than
735 mm. The length is adjusted with the spring element on the variable support
when installing in rack systems with an installation depth greater than/less than
735 mm. The length is adjusted with the spring element on the variable support
Ê
Secure the telescopic rails as described in section
.
Ê
Mount the server (see section
) and route
the cables as described in the rack manual.
4.2.3
Inserting the server
Figure 6: Preparing the server
Ê
Place the server rails on the three screws on both sides of the server (1) and
slide the server rails forwards to secure them (2).
slide the server rails forwards to secure them (2).
The safety spring (a) must engage with an audible click.
1
2
a