Fujitsu RX330 用户手册

下载
页码 94
66
Operating manual
 RX330 S1
Incorrect date and time
Troubleshooting and tips
Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the 
mouse supplied.
Ê
Check in the 
BIOS Setup
 that the mouse controller is 
Enabled
.
7.7
Incorrect date and time
Ê
Set the date and time in the operating system or in the 
BIOS Setup
 under the 
Main
 menu, using 
System Date
 and 
System Time
 respectively.
I
Note that the operating system may affect the system time. For example, 
the operating system time may deviate from the system time under Linux, 
and would overwrite the system time in the default setting on shutdown.
If the date and time are still wrong after the server has been switched off and 
back on again, replace the lithium battery (for a description refer to the Technical 
Manual for the D2440 system board) or contact our customer service team.
7.8
System will not boot
The system will not boot after installing a new hard disk drive.
SAS configuration incorrect
Ê
Check the settings for the hard disk drives (
SAS Device Configuration
) and the 
additional settings in the SAS configuration menu.