Fujitsu Siemens Computers BS2000/OSD 用户手册
18
U25339-J-Z126-1-7600
Control panel on the global storage cabinet
Controls and indicators
POWER COMPLETE
This green light is lit up after the system power controller has terminated the switching
on sequence without any errors. The light is extinguished when the POWER OFF button
is pressed.
on sequence without any errors. The light is extinguished when the POWER OFF button
is pressed.
SSU CHECK
The display illuminates if there is an error in global storage. The buzzer sounds at the
same time.
same time.
BATTERY STATUS
These indicators indicate the state of the backup battery:
Potentiometer for volume
This is used to set the volume of the buzzer.
Potentiometer for brightness
This is used to set the brightness of the LCD display.
4.2.2
Button functions
LCD BACK LIGHT
The LCD display STATUS (background) is illuminated for five minutes when you press
this button. The lights go out immediately when you press this button again.
this button. The lights go out immediately when you press this button again.
CANCEL / ALARM STOP
When this button is pressed, the buzzer in the control panel is stopped and the SSU
CHECK light is extinguished. If another malfunction occurs after the light is extin-
guished, e.g. a machine error or a malfunction in the power supply, the buzzer and the
SSU CHECK light are reactivated.
CHECK light is extinguished. If another malfunction occurs after the light is extin-
guished, e.g. a machine error or a malfunction in the power supply, the buzzer and the
SSU CHECK light are reactivated.
Name
Color
Meaning
Measure
BS
green
Backup battery is installed
BBON
green
Backup battery is active
BI
green
Backup battery is not available
DI
green
Data in the global memory are invalid
DS
green
Indicator is not in use
BE
yellow
Error in backup battery operation
Call service dept.
BF
yellow
Error in the backup battery
Call service dept.