Fujitsu Siemens Computers BS2000/OSD 用户手册
84
U25339-J-Z126-1-7600
IPL in PROGRAM LOAD FRAME: DETAIL-1
Standard processing in SVP mode
Catalog parameters
Ê
Press the
key.
The values entered are saved and thus made known to the SVP. These settings are
accessed for each IPL.
accessed for each IPL.
6.5.5
Executing IPL in PROGRAM LOAD FRAME: DETAIL-1
The IPL can be executed manually 1according to the setting using PROGRAM LOAD
FRAME DETAIL-1.
FRAME DETAIL-1.
The following are specified in the example below:
●
loading VM2000
●
dialog startup
●
IPL device is specified manually by the entry of the unit address
(here: loading the BS2000 from a device with the unit address A108)
(here: loading the BS2000 from a device with the unit address A108)
Conditions
You must be in the AUXILIARY FRAME: LOAD PRESET2 screen.
Invoking the PROGRAM LOAD FRAME: DETAIL-1 screen
Ê
Press the
key to return to the MODE SELECTION FRAME.
Ê
Enter the frame code
LD
and press
.
Or enter the
FR LD
command in line 24 and press
.
After entering
LD
or
FR LD
in the MODE SELECTION FRAME, either the
PROGRAM LOAD FRAME: DETAIL-1 or the PROGRAM LOAD FRAME:
BASIC screen is displayed, depending on the INITIAL FRAME setting in the
AUXILIARY FRAME: LOAD PRESET1 screen (see page 82).
BASIC screen is displayed, depending on the INITIAL FRAME setting in the
AUXILIARY FRAME: LOAD PRESET1 screen (see page 82).
P12
F3
ENTER
ENTER
i