Fujitsu MX130 S2 用户手册
58
Upgrade and Maintenance Manual
MX130
S2
Basic hardware procedures
4.6
Switching on the server
V
CAUTION!
●
Before switching on the server, make sure the server cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY MX130 S2 server must not run while the server cover is
removed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY MX130 S2 server must not run while the server cover is
removed.
●
.
Ê
Connect all peripheral cables to the rear connector panel of the server.
Ê
Connect the power cord as described in section
Ê
Connect the power cord to the power outlet.
Figure 13: Power button on the front panel
Ê
Press the On / Off button to start up the server (1).
Ê
Ensure that the power-on indicator in the On / Off button is lit green.
I
For more information see
.
/