Lucent Technologies 555-233-115 用户手册
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-95
Add a Switch Node Carrier (Standard Reliability)
6
Save Translations
1. Log in at the management terminal.
2. Type save translation disk and press
Enter
. This instructs the system to
take all translation information in memory and write it to the disk.
3. If the system contains a TN750/B Announcement circuit pack, type
display announcements and press
Enter
.
4. If administered recorded announcements are listed, type list
configuration software-version and press
Enter
. Check screen 2 to find
out when the announcements were last saved. Save the current
announcements by typing save announcements disk and pressing
announcements by typing save announcements disk and pressing
Enter
.
5. Type backup disk and press
Enter
. This instructs the system to backup the
current information on disk to the system tape(s).
6. Update backup tape(s), if required.
Shut Down DEFINITY LAN Gateway System
If a DEFINITY LAN Gateway system resides in the control cabinet to be
upgraded, prepare to shut down the DEFINITY LAN Gateway assembly and
allow the disk to completely spin down.
upgraded, prepare to shut down the DEFINITY LAN Gateway assembly and
allow the disk to completely spin down.
!
CAUTION:
Make sure that you save the system parameters if you plan to reuse the
current system.
current system.
!
WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before
powering down the system cabinet where it resides can damage the LAN
Gateway disk.
powering down the system cabinet where it resides can damage the LAN
Gateway disk.
1. Log onto the DEFINITY LAN Gateway. See the
DEFINITY Communications
System Generic 3 Installation, Administration and Maintenance of
CallVisor ASAI over the DEFINITY LAN Gateway.
CallVisor ASAI over the DEFINITY LAN Gateway.
2. When the main menu appears, select
Maintenance.
3. Select
Reset System from the Maintenance menu.
4. Select
Shutdown from the Reset System menu.
5. Unseat the LAN Gateway assembly from its backplane connectors.