Axis Communications Network Print Servers 用户手册

20

AXIS 5500 / AXIS 5550 User’s Manual

1. Open a Command Prompt and enter the following commands:

2. The host will return 

 

, or a similar message. This 

indicates that the address has been set and that communication is 
established. 

3. Log in to the print server’s Web pages (see 

Server Management, on page 88), select 

Detailed View | TCP/IP Network and define Default Router and Subnet 

Mask. Make sure you first set DHCP, Auto-IP, BOOTP and RARP to No!

You have now set the IP address of the print server. Continue to “Making 

1. Open a Terminal and enter the following commands: 

2. The host will return 

, or a similar message. This indicates 

that the address has been set and that communication is established. 

3. Log in to the print server’s Web pages (see 

Server Management, on page 88), select 

Detailed View | TCP/IP Network and define Default Router and Subnet 

Mask. Make sure you first set DHCP, Auto-IP, BOOTP and RARP to No!

You have now successfully set the IP address of the print server. Continue 

to “Making Network Printers available for printing on your PC” on page 

arp -s <IP address> <Ethernet address>
ping <IP address>

arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191

•  When you execute the ping command for the first time, you will experience a significantly 

longer response time than is usual

.

•  The ability to set the IP address with ARP and PING will only be enabled the first 10 

minutes after restarting the print server.

•  By using the arp -d command, the static entry in the arp table is removed from the 

host’s cache memory.

arp -s <IP address> <Ethernet address>
ping <IP address>

arp -s 192.168.3.191 00:40:8c:10:00:86
ping 192.168.3.191