Axis Communications Network Print Servers 用户手册

AXIS 5500 / AXIS 5550 User’s Manual

69

Axis print servers with software version 6.0 or later allow users to print in 

a Pure IP environment using traditional queue-based printing (which 

usually uses the IPX transport protocol). Note that only NDS queue-based 

printing is supported.

In the NetWare Pure IP environment, you must use the NetWare 

Administrator to create the printer, print server and queue objects.

Follow the instructions below to install the Axis Network Print Server in 

the NetWare Pure IP environment:

1. Start the Configuration Wizard from the 

User mode in the Axis Network 

Print Server Web interface.

2. Click your way through the Wizard until reaching the 

NetWare page.

3. Set the parameters on the NetWare page: 

• PSERVER NDS Tree (example: NW5TREE)

or
PSERVER NDS File Server: (example: FILESERVERNAME)

• PSERVER NDS Distinguished Name: 

(example: AXISXXXXXX.<context>, where <context> is the container 
where you want to create your print server)

Setting the PSERVER parameters in the Axis Network Print Server Web interface.

4. Use the NetWare Administrator to create the printer, print server and queue 

objects in the NDS tree and then link them together. The 

Quick Setup (Non-NDPS) utility can be used for this. Go to Tools in the 

NetWare Administrator.