Ricoh 106/LD215c 用户手册

Delivering Scan Files

72

This section explains the preparation and settings for delivering scan files.

❒ This function is available only when Function Upgrade Option is installed.
❒ The network delivery scanner requires a delivery server that has software

such as the optional ScanRouter delivery software installed. For details about
the ScanRouter delivery software, see the manuals supplied with the Scan-
Router delivery software.

❒ To view files delivered to an in-tray, you must install DeskTopBinder on the

client computer.

A

Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or IEEE 1394 ca-
ble, or wireless LAN (IEEE 802.11b).

B

Make the necessary settings in [System Settings].
If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
• Specify the machine’s IPv4 address and subnet mask.
• In [Effective Protocol], enable [IPv4].
• Set [Delivery Option] to [On].

C

D

Using the ScanRouter delivery software, register this machine as an I/O de-
vice. In addition, register destinations and specify such settings as the de-
livery type and sender.
For details, see the ScanRouter delivery software manuals.

❒ To connect the machine to the network using an IEEE 1394 cable or wire-

less LAN (IEEE 802.11b), an extended 1394 board or extended wireless
LAN board is required respectively. For details, see Network Guide.

❒ Items to set up in [System Settings] vary depending on the network environ-

ment. For more information about network settings, see General Settings
Guide.

❒ For details about installing DeskTopBinder Lite, see “Installing DeskTop-

Binder Lite from Provided CD-ROM”.