Toshiba DP120F 服务手册

下载
页码 121
53
The  following  table  describes  the  Initial  Setup  Flow  according  to  your  conditions  or
needs.
To  use  the  functions,  the  network  configuration  for  this  machine  must  be  set  up
correctly.    For  the  values  of  the  network  configuration,  contact  to  your  network
administrator.
TCP/IP Configuration Setup
The  items  and  the  parameter  values  for  the  TCP/IP  Configuration  Setup  differs
whether the IP address of this machine is obtained from a DHCP server or assigned
manually.
➤P54  TCP/IP  CONFIGURATION  SETUP
NOTE:
When  you  want  to  set  to  SMTP  for  the  Receive  Mode,  the  IP  address  must  be
assigned  manually.
••••• BootP/DHCP
Set  to  enable  or  disable  the  BootP/DHCP  whether  obtaining  the  IP  address  from
the  DHCP  server.  When  the  TCP/IP  settings  of  this  machine  are  provided  by  the
DHCP  server,  set  this  to  ON.    Set  this  to  OFF  the  BootP/DHCP  when  you  want
to  assign  the  TCP/IP  settings  manually.
••••• IP  Address
Assign  the  IP  address  of  this  machine.    Do  not  set  this  when  the  IP  address  is
obtained  from  the  DHCP  server.    The  machine  uses  the  IP  address  here  even  if
the  BootP/DHCP  is  set  to  be  enabled.
••••• Subnetmask
Assign  the  Subnetmask  if  required.
••••• Default Gateway
Assign  the  Default  Gateway  address  when  the  machine  is  used  in  the  network
through a router.
••••• Host Name
Set  the  name  of  this  machine.    This  name  is  used  as  the  sender  name  for  E-
mails.
SETUP - SETUP FLOW
E-mail Account Setup
The  items  and  the  parameter  values  for  the  E-mail  Account  Setup  differs  whether
the  machine  uses  POP  or  SMTP  for  the  Receive  Mode.    Available  functions  vary
according  to  the  type  of  the  Receive  Mode.    For  further  details,  refer  to  “INTRO-
DUCTION  -  FEATURES”.
➤P59  E-MAIL  ACCOUNT  SETUP
NOTE:
When  the  IP  address  is  obtained  from  the  DHCP  server,  the  Receive  Mode
cannot  be  set  to  SMTP.
E-mail Properties Setup
You  can  also  configure  the  E-mail  properties.    After  the  machine  is  set  up,  it  is
recommended  to  configure  the  E-mail  properties  to  use  Internet  Fax  features.
➤P68  E-MAIL  PROPERTIES  SETUP
Onramp Gateway Setup
In  order  to  use  the  Onramp  Gateway  Transmission,  you  must  set  some  configura-
tions  correctly.
➤P80  ONRAMP  GATEWAY  SETUP
Offramp Gateway Setup
In  order  to  use  the  Offramp  Gateway  Transmission,  you  must  set  some  configura-
tions  correctly.
➤P85  OFFRAMP  GATEWAY  SETUP
Additional Functions Setup
The  setup  functions  for  Novell  and  Network  utilities  (FTP)  become  available  when
the  Internet  Fax  Kit  is  fitted,  though  they  are  not  used  for  Internet  Fax  setup.
➤P90  ADDITIONAL  FUNCTIONS  SETUP
Item
Use DHCP Server
Assign  IP  Address
BootP/DHCP
Set to ON
Set  to  OFF
IP  Address
Not required
Required
Subnetmask
Not required
Required  if  necessary
Default  Gateway
Not required
Required  if  necessary
Host  Name
Required
Required
Item
POP
SMTP
E-mail  Address
Required
Required
Error E-mail Forward Address
Required
Required
Receive  Mode
Set  to  POP
SMTP
POP  Server  Address
Required
Not required
POP  Time
Required
Not required
POP Login Name
Required
Not required
POP  Password
Required
Not required
SMTP  Server  Address
Required
Required