Toshiba DP120F 服务手册

下载
页码 121
86
Setting  Up  for  Offramp  Gateway
To  setup  this  machine  for  the  Offramp  Gateway  transmission:
E-mail  Account  Setup
Note
E-mail  Address
The  domain  of  your  E-mail  address  becomes  a  name
added  the  sub-address  for  this  machine  and  domain  name
of  the  SMTP  server.  For  example,  if  the  domain  name  of
the  mail  server  is  “toshiba.com”  and  sub-address  of  this
machine  is  “host1”,  the  domain  of  the  E-mail  address  for
this  machine  will  be  a  FQDN
*1
  that  the  sub-address  is
added  to  this  domain.
[i.e.  username@host1.toshiba.com]    (See  page  60.)
Receive  Mode
Set to “SMTP”. (See page 62.)
SMTP  Server  Address
Assign  the  IP  address  of  the  main  mail  server  that  sup-
plies the domain for your machine. (See page 67.)
Important:
Some settings are required to be configured at the SMTP server.
The  domain  name  for  this  machine  must  be  assigned  on  the  main  SMTP  server.
Set  up  the  SMTP  server  to  forward  the  E-mail  to  this  machine  when  the  SMTP  server  receives
an  E-mail  whose  address  contains  the  host  name  for  this  machine.
Ask  your  administrator  to  set  up  the  SMTP  server.
How to send a document using Offramp Gateway
Using  the  Offramp  Gateway  transmission,  you  can  send  E-mail
documents  to  a  facsimile  connected  in  the  public  switched  tele-
phone  network.    Also,  this  machine  supports  addressing  the  ITU-T
Mailbox  in  the  remote  facsimile.
When you send an E-mail using the Offramp Gateway transmission,
the syntax of the Offramp-email-address must be specified correctly.
Sending to Facsimile
Offramp-email-address  syntax:
FAX=xxxxxxxxx@FQDN
[“xxxxxxxxx”  is  the  telephone  number  of  a  facsimile.]
For  example  when  the  assigned  domain  name  (FQDN)  for  this
machine  is  “host1.toshiba.com”  and  the  facsimile  number  is
“1212121212”:
i.e.
FAX=1212121212@host1.toshiba.com
Sending to Subaddress
Offramp/subaddress-email-address  syntax:
FAX=xxxxxxxxx/T33S=yyyy@FQDN
[“xxxxxxxxx”  is  the  telephone  number  of  a  facsimile.]
[“yyyy”  is  the  subaddress.]
SUPPLEMENT:
“T33S”  is  a    syntax  code  to  specify  a  subaddress.    When
you  send  to  a  subaddress  using  the  Offramp  Gateway,  the
facsimile  number  and  the  subaddress  number  is  separated
with  “/”.
For  example  when  the  assigned  domain  name  (FQDN)  for  this
machine  is  “host1.toshiba.com”,  the  facsimile  number  is
“1212121212”, and the subaddress is “1234”:
i.e.
FAX=1212121212/T33S=1234@host1.toshiba.com
NOTE:
Any  international  telephone  number  entry  is  not  accepted  for
the  facsimile  number  in  the  Offramp-email-address.
Offramp  Gateway  Properties  Setup
Note
E-mail  to  FAX  Gateway
This  sets  the  machine  to  allow  forwarding  the  document
that  is  received  by  the  Offramp  Gateway  transmission.
(See page 87.)
Gateway  Print
This  sets  whether  to  print  the  document  sent  from  the
Internet  FAX  machine  using  the  Offramp  Gateway  trans-
mission.    The  machine  prints  the  document  before  for-
warding  it  to  the  facsimile,  so  that  you  can  confirm  what  is
sent using the Offramp Gateway. (See page 88.)
Gateway  Security
This  sets  whether  to  check  the  fax  number  where  the
document  is  being  sent  to  before  allowing  the  document  to
be  forwarded  via  the  Offramp  gateway.  If  the  fax  number
of  the  facsimile  is  not  registered  as  One  Touch  dials  or
Abbreviated  dials,  the  machine  does  not  allow  the  Offramp
Gateway for this document. (See page 89.)
*1
“Fully Qualified Domain Name” consists of a host name and domain name.