KitchenAid KUDC25CH 用户手册

下载
页码 52
8
Loading the Top Rack
The top rack is designed for cups, glasses, and smaller 
items. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary 
from the drawings shown.
10 place setting load
Place items so open ends face down for cleaning and 
draining.
Load glasses and cups in top rack only. The bottom 
rack is not designed for glasses and cups. Damage can 
occur.
12 place setting load
Place cups and glasses in the rows between prongs. 
Placing them over the prongs can lead to breakage.
Cup and glass load
China, crystal, and other delicate items must not touch 
each other during dishwasher operation. Damage may 
occur.
Load plastic items in the top rack only. Only plastic 
items marked “dishwasher safe” are recommended.
Load plastic items so the force of the spray does not 
move them during the cycle.
To avoid chipping, do not let stemware touch other 
items.
Small bowls, pans, and other utensils can be placed in 
the top rack. Load bowls in the center section for best 
stability.
Cup shelf
Fold down the extra shelf on the right side of the top rack 
to hold additional cups, or long items such as utensils and 
spatulas.
Divided tines
The row of tines on the right side of the top rack can be 
adjusted to make room for a variety of dishes. The tine 
adjusters have teal colored tips.
To adjust the front half 
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the tine holder.
3. Move the tines to the left to make room for larger 
dishes. Move the tines to the right to wedge plastic or 
other lightweight items against the side of the rack.
To adjust the back half
Push the tines down gently toward the center of the rack.