Smeg PVA750BE 用户手册

 

 

Reverse the procedure described in point “5.1 Removing the hob skin”. 

 

 

 

 

Fit the pan stands as described in point 

 

Reassemble the components on the burner and fit the 
knobs onto the tap rods. 

 

Light the burner and turn it to the minimum 

 setting. 

Remove the knob again and adjust the regulator 
screw inside or beside the tap rod (depending on the 
model) until an even minimum flame is obtained. 
Put the knob back in place and check the stability of 
the burner flame (the flame must not go out when the 
knob is turned quickly from the maximum to the 
minimum setting). 

 

To adjust the minimum level when using bottled gas, the adjuster screw inside or 
beside the tap rod must be turned fully clockwise (depending on the models). 
The diameters of the bypasses for each individual burner are stated in point “5.2 
Adjusting for bottled gas". 

 

 

replace the label on the casing with the label for the new gas. The label is supplied in 
the bag with the LPG nozzles (G30 - G31). 

 

 

 

Burner type 
 
1 Auxiliary 
2 Semi rapid 
3 Rapid 
4 Ultra rapid 

 

 
 

 

 

Over time, the gas taps may become stiff or jam. Clean their insides and change their 
lubricating grease. This operation must be carried out by a skilled technician.