Smeg SER63LPG3 用户手册

 

9 

 

   

 

  Connection to the gas mains may be made with a rigid copper pipe 

or with a flexible pipe and conforming to the provisions defined by 
standard regulations in force. 
To facilitate connection, fitting A on the rear of the appliance may be 
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting 
A to the desired position, and retighten hexagon nut B (tightness is 
ensured by a biconical brass ring). Use a soapy solution to check for 
proper tightness. Never use a free flame. The hob has been inspected 
for G20 (2H) natural gas at a pressure of 20 mbar. For use with other 
types of gases, see Section “ ADAPTATION TO DIFFERENT TYPES 
OF GAS”. The gas intake fitting is ½” gas external threaded. 

 

   

 

 

  Connection with rigid copper pipe: the 

connection to the gas mains must not 
provoke stress of any kind on the hob. 
Connection may be made by using 
biconical adapter D with insertion of gasket 
C (supplied). 
 

 

   

 

  Connection with flexible pipe: use only 

flexible pipes conforming to standard 
regulations in force, inserting gasket C 
(supplied) between fitting A and flexible 
pipe E.