Smeg SAI70MW 用户手册
10
Residual heat indication
After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
Power and Super Power function
Power [ P ] and Super Power [
] grant a boost of Power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Power.
This is foreseen for example to heat up rapidly big quantities of water, like nuddles
This is foreseen for example to heat up rapidly big quantities of water, like nuddles
•
Start up / Stop the Power:
Action
Control panel
Display
Start up the Power
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Stop the Power
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
•
Start up / Stop Super Power
Action
Control panel
Display
Start up the Power
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Start up Super Power
Re-press on the end of the “SLIDER”
[
and P ]
Stop the Super Power
Slide on the “SLIDER“
[ P ] to [ 0 ]
Stop Powerr
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
•
Power management:
The hole cooking hob is equipped with a maximum of Power. When the Power function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
The other heating zone:
(example: Booster level 9)
[ P ] is displayed
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 999 minutes) for each heating zone.
settings (from 0 to 999 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Action
Control panel
Display
Select the power level
slide on the “SLIDER“
[ 1 ] to [ P ]
Select theTimer
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
from the timer until the
desired display is on
Decrease the time
Press key [ - ] from the timer
[ 60 ] to 59, 58...
Increase the time
Press key [ + ] from the timer
Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.