Smeg A11CER-5 用户手册
Instructions for the user
7.6 Spit cooking
FUNCTION SWITCH
THERMOSTAT SWITCH AT MAXIMUM
Prepare the spit with the food, blocking fork screws A. Insert frame B into
the third guide from the bottom. Remove handle D and position the spit
shaft so that pulley E is guided on the link of frame B in the right side.
Insert the drip tray into the oven as far as it will go until the tip of the rod is
in line with the hole C. Now rock the frames B to insert the tip of the rod
into the drive connection C of the rotisserie motor on the side of the oven.
Pour a bit of water into the pan to avoid smoke from the dripping.
Keep the oven door closed during cooking.
the third guide from the bottom. Remove handle D and position the spit
shaft so that pulley E is guided on the link of frame B in the right side.
Insert the drip tray into the oven as far as it will go until the tip of the rod is
in line with the hole C. Now rock the frames B to insert the tip of the rod
into the drive connection C of the rotisserie motor on the side of the oven.
Pour a bit of water into the pan to avoid smoke from the dripping.
Keep the oven door closed during cooking.
It is normal for the thermostat light to go on and off intermittently during
cooking. This indicates the temperature inside the oven is regular.
cooking. This indicates the temperature inside the oven is regular.
CAUTION: the frames B must be fitted
as shown in the diagram
as shown in the diagram
47