Franke Consumer Products FSL 905 BK/XS ECS 用户手册

 

 

 

 

 

 
N.B. To avoid reassembling the wrong way 
round, the two fans have different couplings. 
 
•  Reassemble the fans on the corresponding 

pins, pressing them until they snap into 
place. 

 
 
 
 
 
 
 
•  Fit the protection grilles so that the teeth 

coincide in the “FREE” position and when 
turned to “LOCK”. 

• Replace the EASY CLEANING suction 

unit on the hood, inserting it in position and 
connecting it to the support pins. 

•  Turn the lock levers, or screw in the lock 

plugs. 

• Connect the power connector and the 

command connector to the sockets on the 
sides of the suction device. 

•  Replace any activated charcoal odour fil-

ters. 

•  Replace the grease filters. 
•  Connect the hood to the power supply sys-

tem, by turning the two-pole switch on the 
mains power line to on, or by turning the 
main switch on. 

•  Check that the hood is working properly, 

by turning the motor and lighting on.