KitchenAid KCM223 用户手册

3. For glass carafe models, press the 

MODE button 6 times to enter the Clean 
mode. 
NOTE: For thermal carafe models, press 
the MODE button 5 times to enter the 
Clean mode. 

The “Clean” indicator will flash until this 
programming cycle is complete.

4. Press the PROGRAM/SET button. The 

“Clean” and “ON” or “OFF” indicators 
will flash. Press the “+” (plus) or “-” 
(minus) button to select “ON.”

5. Press and hold the PROGRAM/SET 

button to program the Clean setting. A 
short beep will sound, indicating 
programming is complete.

NOTE: If you do not hold the 
PROGRAM/SET button until a short 
beep is heard, the settings will be 
maintained and the coffee maker will 
exit to the default mode.

6. Press the BREW button to start the 

cleaning cycle. Once the cleaning cycle 
is complete, the “Clean” indicator will 
turn off.

7. Rinse the coffee maker by running it 

through 2 brewing cycles using a full 
water tank of fresh, cool water each 
time.

8. Wash the brew basket in hot, soapy 

water and rinse with hot water. The brew 
basket can also be washed in the upper 
rack of the dishwasher.

9. Reinstall or replace the water filter. 

Replace the filter every 3 months under 
normal use. Replace it more often under 
heavy use or hard water conditions.

T

ROUBLESHOOTING

■

If the brew timer display is not 
illuminated:
Check to see whether the coffee maker 
is plugged into a grounded 3-prong 
outlet. If it is, check the fuse or circuit 
breaker on the electrical circuit the 
coffee maker is connected to and make 
sure the circuit is closed.

■

If only a portion of the water added to 
the coffee maker actually brews:
The coffee maker requires immediate 
descaling. Please refer to “Descaling the 
Coffee Maker” in the “Coffee Maker 
Care” section.

■

If “Err4” appears on the brew button 
timer display:
A button may be jammed. Unplug the 
coffee maker and press each button 
several times.

Plug the coffee maker into a grounded 
3-prong outlet.

If “Err4” appears again on the display, 
repeat this procedure.