Bunn SNG0033000 用户手册

Page 16

DUAL

BREWERS

 

It is possible to operate the brewer without using 

a Smart Funnel and/or a G9-2T DBC or MHG Grinder. 

If a standard funnel, or if a non-DBC grinder is used 

the brewer will automatically select a NO NAME  coffee  

when the BREW switch is pressed. This means that 

no name was read from the funnel's handle.

  There is a NO NAME coffee program that can be 

set in the SINGLE brewer and two NO NAME coffee 

programs that can be set in the DUAL brewer which are 

referred to as NO NAME LEFT and NO NAME RIGHT. 

The left and right sides of the brewer can be set up 

independently of each other. This includes BREW 

TIMES, and DRIP-OUT TIMES. The brewer will perform 

in the same capacity as a standard Bunn Single/Dual 

Brewer.

  The instructions for programming the NO NAME 

settings are on the following pages. The same steps 

are followed for setting the recipe as those that are 

used to MODIFY A RECIPE, beginning on page 21.

  Note that on SINGLE brewers, when the display 

reads  NO NAME, that is when MODIFY should be 

pressed in order to set the parameters for the NO 

NAME coffee.

  On DUAL brewers, when the display reads NO 

NAME LEFT, that is when MODIFY should be pressed 

in order to set the parameters for the NO NAME LEFT 

coffee. Otherwise, press NEXT to display NO NAME 

RIGHT. At this point, MODIFY should be pressed in 

order to set the parameters for the NO NAME RIGHT 

coffee. 

NOTE:  Before beginning setup, insert funnel(s) into 

the funnel rails (both sides on DUAL brewers), and 

place a Soft Heat Server(s) beneath the funnel(s).

REVIEW RECIPES?

     NO                   YES 

NO-NAME

 MODIFY SHOW NEXT

NO-NAME LEFT

 MODIFY SHOW NEXT

NO-NAME RIGHT

 MODIFY SHOW NEXT

BREW OZ.  XX.X

(-)     DONE     (+)

(COFFEE NAME)

 MODIFY SHOW NEXT

EXIT TO

NEXT FUNCTION 

SCREEN

SINGLE

BREWERS

41341 080108