Bunn Dual TF DBC 用户手册
Page 32
COPY SETTINGS (NO NAME COFFEE SETTINGS
ONLY)
This function is used to transfer all the brew set-
tings from a NO NAME coffee fl avor programmed
on one side of the brewer to the other side. A NO
NAME coffee is a fl avor that is not in the grinder's
memory or is what appears if a Smart Funnel
tings from a NO NAME coffee fl avor programmed
on one side of the brewer to the other side. A NO
NAME coffee is a fl avor that is not in the grinder's
memory or is what appears if a Smart Funnel
®
is
not used.
For example, once the left side's 3 batch sizes are
programmed (brew volumes, bypass percentages,
pulse brew times, pre-infusion times, and drip-out
times) for a particular NO NAME coffee, all the data can
be transferred from the left side of the brewer to the
right side in one step. The data can also be transferred
from right to left, if the right side had been the initial
set-up side. This results in less set-up time.
pulse brew times, pre-infusion times, and drip-out
times) for a particular NO NAME coffee, all the data can
be transferred from the left side of the brewer to the
right side in one step. The data can also be transferred
from right to left, if the right side had been the initial
set-up side. This results in less set-up time.
If two different NO NAME setups are required,
one on the left, the other on the right side, it is not
recommended that this function be used.
recommended that this function be used.
Procedure to copy settings:
1. Press and hold the upper right hidden switch until
1. Press and hold the upper right hidden switch until
the display reads UNITS. Release the switch. Con-
tinue to press and release switch until the display
reads COPY SETTINGS.
tinue to press and release switch until the display
reads COPY SETTINGS.