KitchenAid 161 使用和维护

1.  Turn Stand Mixer speed control to OFF.

2.  Unplug mixer.

3.  Loosen the attachment knob (A) by 

turning it counterclockwise. 

4.  Remove the attachment hub cover or 

flip up hub cover. 

5.  Insert the attachment shaft housing (B) 

into the attachment hub (C) making 

certain that attachment power shaft 

fits into square hub socket. 

6.  It may be necessary to rotate the 

attachment back and forth. When the 

attachment is in proper position, the 

pin on the attachment housing will fit 

into the notch on the hub rim. 

7.  Tighten the attachment knob by turning 

it clockwise until the attachment is 

completely secured to mixer.

4

1.  Insert the grind worm (A) into the grinder body (B). 

2.  Place the knife (C) over the square shank at the exposed end of the grind worm. 

3.  Place grinding plate (D) over the knife, matching the tabs of the plate with the 

notches of the grinder body. 

4.  Place ring (E) on grinder body, turning by hand until secured but not tightened. 

 The combination food pusher/wrench (F) is used for removal of ring (E) only. 

Do not use it to tighten ring (E).

  NOTE: Fruit/Vegetable Strainer (Model FVSP) is available to convert Food Grinder to a 

Fruit/Vegetable Strainer.

  Sausage Stuffer (SSA) is available to convert Food Grinder to Sausage Stuffer.