hussman IGFP-R3 用户手册

下载
页码 33
igfP-R3, R3P-0608
/CHINO
A publication of HUSSMANN
®
 Chino 
13770 Ramona Avenue • Chino, California 91710
(909) 68-894 FAX
(909) 590-4910  
(800) 395-99 
Keep this booklet with the case at all times for future reference.
general instructions
table of contents
this Booklet contains information on:
R3: Refrigerated Service Top/Self-Service Front Case
R3P:  Service  Prep Top/Refrigerated  Self-Service  Front 
Case
R3TO: Service Top only for in-counter installation
Shipping damage
All equipment should be thoroughly examined for shipping 
damage before and during unloading.
This equipment has been carefully inspected at our factory 
and the carrier has assumed responsibility for safe arrival. 
If damaged, either apparent or concealed, claim must be 
made to the carrier.
apparent loss or damage
If there is an obvious loss or damage, it must be noted on 
the freight bill or express receipt and signed by the carrier’s 
agent; otherwise, carrier may refuse claim. The carrier will 
supply necessary claim forms.
concealed loss or damage
When loss or damage is not apparent until after equipment 
is uncrated, a claim for concealed damage is made. Make 
request in writing to carrier for inspection within 15 days, 
and retain all packaging. The carrier will supply inspection 
report and required claim forms.
Shortages
Check  your  shipment  for  any  possible  shortages  of 
material. If a shortage should exist and is found to be the 
responsibility of Hussmann Chino, notify Hussmann Chino
If such a shortage involves the carrier, notify the carrier 
immediately, and request an inspection. Hussmann Chino 
will acknowledge shortages within ten days from receipt 
of equipment.    
hussmann chino Product control
The  serial  number  and  shipping  date  of  all  equipment 
has been recorded in Hussmann’s files for warranty and 
replacement part purposes. All correspondence pertaining 
to warranty or parts ordering must include the serial number 
of each piece of equipment involved, in order to provide 
the customer with the correct parts. 
This equipment is to be installed
to  comply  with  the  applicable
NEC, Federal, State, and Local
Plumbing  and  Construction
Code  ha ving  jurisdiction.