Smeg SW Range 用户手册

下载
页码 14
12
GB
Fault finding
Fault
Possible cause
Remedy
No control lamps 
are lit.
The appliance is switched off.
Power failure; the fuse is blown; 
the appliance is not plugged in 
correctly.
Press the on/off switch.
Check that power is connected. 
Reset the fuse.
Water collects on 
the glass shelves.
Items of food at the back of the 
shelves are in contact with the 
rear wall of the cabinet, thus 
causing condensation to run onto 
the shelf.
Move the rearmost items for-
wards.
Water collects in 
the bottom of the 
cabinet.
The defrost water drain is 
blocked. 
Clean the defrost water channel 
and the drain hole on the rear 
wall of the cabinet.
Vibration or 
bothersome noise.
The appliance is not level.
The appliance is resting against 
other kitchen elements.
Bins, containers or shelves are 
not positioned correctly or are 
jammed.
Containers or bottles inside the 
cabinet are rattling against one 
another.
Level the appliance using a spirit 
level.
Move the appliance away from 
the kitchen elements or appli-
ances it is in contact with.
Check movable fittings and ad-
just them if necessary.
Move containers and/or bottles 
apart.
Compressor runs 
continuously.
Temperature setting too low.
High room temperature.
Adjust temperature to a higher 
setting.
Ensure adequate ventilation.
Temperature in 
refrigerator section 
too high.
Temperature setting.
Many items have been placed 
in the refrigerator section at the 
same time.
The door is opened too often.
Lower the temperature setting.
Distribute items within the cabi-
net to improve air circulation.
Keep door closed.