Smeg 142468 用户手册
Fault:
Cause/Remedy
Diffi cult door opening:
• If you attempt to open the immediately closed door
of the freezer you may experience resistance. This
happens because certain quantity of cold air escapes
from the appliance through the open door and is
replaced by warm ambient air. Cooling of such air
creates negative pressure (vacuum) and suction,
which prevents easy opening of the door. This is
normalized after several minutes and you can open
the door with ease.
happens because certain quantity of cold air escapes
from the appliance through the open door and is
replaced by warm ambient air. Cooling of such air
creates negative pressure (vacuum) and suction,
which prevents easy opening of the door. This is
normalized after several minutes and you can open
the door with ease.
Bulb replacement:
• Before replacing the light bulb, disconnect the
appliance form the power supply. Using the
screwdriver remove the cover, replace the bulb with a
new one (E 14, max. same voltage as the factory one
and fi t back the cover.
screwdriver remove the cover, replace the bulb with a
new one (E 14, max. same voltage as the factory one
and fi t back the cover.
• Don’t forget: the old bulb does not belong to organic
waste.
• The light bulb is aconsumption material and not
covered by the warranty.
Green LED is fl ashing:
• If the green LED is fl ashing, call the nearest service
center.
Troubleshooting helpful hints: • If you are not able to fi x the trouble by any of the
above tips, turn the thermostat button to the position
,disconnect the power cord from the mains outlet,
wait 10 minutes, and reconnect the appliance.
Should none of the above guidelines be of positive
help, please call for service assistance, quoting
information given on the rating plate either within, or
at rear of an appliance.
information given on the rating plate either within, or
at rear of an appliance.
142468
30