Frigidaire FPIF3093LF 用户手册

17

•  Unlike radiant surface elements, the induction

cooking zones will not glow red when they are hot.

The glass surface may be hot from residual heat

transferred from the cookware and burns may occur.

hands. Always use oven mitts or pot holders to protect

hands from burns.

•  The cooking zones may appear to have cooled after

they have been turned OFF. The glass surface may

still be hot  from residual heat and burns may occur

if the cooktop is touched before it has cooled

sufficiently.

•  Do not place flammable items such as plastic salt

and pepper shakers, spoon holders or plastic

wrappings on the cooktop when it is in use. These

items could melt or ignite if placed too close to hot

cookware.

1.   Place induction cookware with food

  on the desired cooking zone.

2. To activate the cooking zone

press and hold the on-off

for the desired position

until a tone sounds.

3. Set the power level.

Press lo, med (5.0) or hi.

Each touch of the lo or hi pad will

decrease or increase the power

level by .5 increments from 9.5

through 3.0. Simmer power levels

between 3.0 and 1.2 will decrease

or increase by .2 increments.

lo is the lowest power level available.

4. Once cooking is  complete, press

on-off and then remove cookware.

,

,

Start most surface cooking on a higher setting and then

adjust to a lower setting to finish cooking.
The suggested settings (provided in Fig. 1) may vary slightly

depending on the cookware design, quality and amount of

food being prepared.
Be sure to use quality cookware that is constructed with

magnetic base material and meets the minimum and

maximum pan size requirements.

Power boost (Pb)

Use to start heating pans that

contain large amounts of food or to

bring large pans of water to boil

High (8.0-Hi)

Start most foods, bring water to a

boil, pan broiling

Medium high (5.0 - 8.0) Continue a rapid boil, fry, deep fat fry

Medium (3.0 - 5.0)

Maintain a slow boil, thicken sauces

and gravies or steam vegetables

Medium low (2.0 - 4.0) Keep  foods  cooking,  poach,  stew

(2.8 or lower is a simmer setting)

Low (Lo - 2.0)

Keep warm, melt, simmer (2.8 or

lower is a simmer setting)

Fig. 1

•  The suggested power level settings shown in Fig. 1

are based on cooking with medium sized pans with

lids.  Be sure to make any further setting adjustments

needed for best surface cooking results.

• The size and type of utensil used, and the amount and

type of food being cooked will influence the setting

needed for best cooking results.