Toshiba 4511 用户手册

e-STUDIO3511/4511 ADJUSTMENT

3 - 48

November 2003  ©  TOSHIBA TEC

(3)

Assembling carriage wires

Winding the wire around the wire pulley:

a. Pull the Ø3 ball terminal located at the center of the wire into a hole on the wire pulley. One

end of the wire with a hook attached comes to the outside.

b. Wind the wires around the wire pulleys of the front and rear sides. The number of turns to be

wound are as follows:

• 2 turns toward the opposite side of the boss

• 4 turns toward the boss side

Pay attention to the followings when the wires are wound around the pulleys:

• Do not twist the wire.

• Wind the wires tightly so that they are in complete contact with the surface of the pulleys.

• Each turn should be pushed against the previously wound turn so that there is no space

between them.

No space between turns

4 turns

2 turns

Ball terminal

Hook

Color: Silver

4 turns

2 turns

Ball terminal

Hook

Color: Black